Building entries

Building entries Single building entriesThrough the wall - wall already exists (open construction)

Basic variant with inner seal

for buildings with a basement

ESH PolySafe GV1

Add to wish list

Basic variant with inner seal - for buildings with a basement

optical and tangible installation security due to integrated control opening

Gastight and watertight building entry with inner seal in 40 mm sealing width for buildings with a basement for gas, water, power or telecommunications services for installation in core drills or wall sleeves. As this is a modular system, the outer seal can be freely selected as appropriate for the type of wall.

Basic variant with inner seal - for buildings with a basement

Facts

Advantages:

can be installed easily and quickly on-site
Modular design as appropriate for the type of wall
Continuous duct connection possible

Scope of delivery:

1 piece of octagonal inner sealing element with sleeve pipe DN 75
2 pieces of self-tapping screws M8x45 and washers for sealing service lines

Dimensions:

Sealing width: 40 mm
Core drill/wall sleeve: ID 99 - 103 mm
Sleeve pipe OD: 75 mm, 600 mm long
Maximum wall thickness: 500 mm (special lengths on request)

Properties:

DVGW-certified
Also required: gas valve or closed sealing element and external module

Application range:

Water exposure class DIN 18533: W1-E and W2.1-E
Waterproof concrete stress class 1, waterproof concrete stress class 2

Material:

Front plate: glass fibre reinforced polyamide
Rubber: EPDM
Sleeve pipe: PVC-U
Screws: stainless steel V2A (AISI 304L)

Tightness:

gastight and watertight to 1.0 bar
radon tight

Tests/Standards:

DVGW VP 601

Downloads

Installation instructions

ESH PolySafe (PDF, 2MB)

Test reports

Data sheet & tender specification

For download of data sheet and tender specification please configurate the product in the section below and download via the symbol Download symbol

Tender specifications

Accessories

Lubricant -

Lubricant

Support pipe set - For ESH PolySafe including twist protection flaps

Support pipe set

For ESH PolySafe including twist protection flaps

Torsion protection DN 32/DN 40 - for single-line and multi-line building entry systems

Torsion protection DN 32/DN 40

for single-line and multi-line building entry systems

Universal wall sleeve - for any type of wall

Universal wall sleeve

for any type of wall

Universal Toolset -

Universal Toolset

Outer sealing elements

Outer sealing elements

Utility sealing elements

Utility sealing elements

Sleeve caps

Sleeve caps

Hose system

Hose system